Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID598
KitDescCoin Model - Metercase Mount
  1. Remove the coin box and coin slide from the machine's meter case.
  2. Attach the C-5414 Reader Bracket to the front of the C-6911 Meter Case Bracket using(2)C-542010-32 x 1/4 Pan Screws.
  3. Insert the assembled C-6911 Meter Case Bracket into the front opening of the machine's meter case.
  4. Secure the C-6911 Meter Case Bracket into place by attaching the C-0301 Mounting Bolt to the cage nut at the top of the C-6911 Meter Case Bracket from inside the meter case.

Connect Power

Cci readerinstall kit
KitID595
KitDescPower Converter with three taps
  1. Locate the incoming 120v power connection.
    1. The green ground wire should connect to points on the chassis and front panel.
    2. The black and white wires end in a white connector.
  2. Attach C-5101 Spade Tap to the black wire, white wire, and green ground wire.
  3. Connect the C-5210 Power Adapter Harness to the spade taps.
    1. Blue wire to black wire.
    2. Brown wire to white wire.
    3. Green wire to green wire.
  4. Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connector on the C-5602R1 Power Converter.
  5. Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connector on the C-5500 Power Extension Harness.

Connect Machine Interface Harness

Cci readerinstall kit
KitID665
  1. Connect the 4-pin end of the C-5371 Machine Start Harness to the J5 connector on the coin slide interface board.

Connect and Mount Reader

  1. Feed remaining harness ends through the mounting hole.
  2. Connect the free end of the C-5371 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of theC-5500 Power Extension Harness to port 1 (Power Harness Connection Port) as shown in the image above.
Cci readerinstall footer