Versions Compared

Old Version 2

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 3

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID584
KitDescCoin and Card

  1. Place theC-6700-TEMPDrill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Cci readerinstall kit
KitID845
KitDescCard Only - 30lb or Larger Model

  1. Remove existing coin box and coin drop.

  2. Secure C-5414 F2 Mounting Bracketto the C-6903Mounting Bracket using the (2)C-542010-32 x 1/4 Pan Screws.

  3. Install theC-6903Mounting Bracketinto theCoin Vault. Use (4) C-1042Kep Nuts to secure toCoin Vault.

Cci readerinstall kit
KitID868
KitDescCard Only - 20lb Model

  1. Remove existing coin box and coin drop.

  2. Secure C-5414 F2 Mounting Bracketto the C-6902 Mounting Bracket using the (2)C-542010-32 x 1/4 Pan Screws.

  3. Install theC-6902Mounting Bracketinto theCoin Vault. Use (4) C-1042Kep Nuts to secure toCoin Vault.

Connect Power

Cci readerinstall kit
KitID663
KitDescTap 120/240v Power
  1. Tap power as described in the document using theC-5101 Spade Taps provided.
  2. Connect theC-5336 Power Adapter Harness to the installed spade taps. Connect the opposite end to theC-5602 Power Converter.
    1. Secure the ground wire beneath a chassis screw.
  3. Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

Cci readerinstall kit
KitID923
KitDescCoin Drop - Factory Optical
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect theC-6332 Coin Sense Harness to the harness connected to the Coin Drop.
    1. Connect the Redconnector to the Coin Acceptorconnection, where the coin drop was previously connected, on the Machine Control Assembly.
Cci readerinstall kit
KitID885
KitDescCombination Harness - Coin Sense Connections
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the white, male, 8-pin connector from the C-6330 Combination Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

Cci readerinstall kit
KitID608
KitDescSerial
  1. Connect the C-0114-MLV Machine Start Harness to the middle X1 port on the serial communication board.
  2. The RJ11 connector on the end of the C-0114-MLV Machine Start Harness will fit into the middle X1 RJ45 port even though the RJ11 connectoris smaller in size.
  3. CCIDOCCOM Boardsfalse
Cci readerinstall kit
KitID885
KitDescPulse - Combination Harness - Machine Interface Connections
  1. Connect the red, female, 8-pin connector of the C-6330 Combination Harness to the Coin Acceptorconnector on the Machine Control Assembly.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF2 Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through the mounting hole.
  2. (Pulse Combination Harness Only) Connect the free end of theC-6330 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. (Serial Communication Only) Connect the free end of the C-0114-MLV Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.
  4. (Coin and Card Installations Only) Connect the free end of the C-6332 Coin Sense Harness or the white, 5-pin connector from theC-6330 Combination Harnessto port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  5. Connect the free end of the C-5500 Power Extension Harness to port 1 (Power Harness Connection Port) as shown in the image above.

Machine Configuration

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameContinental ProfitPlus
PageWithExcerpt_Machine Configuration

Cci readerinstall footer