Versions Compared

Old Version 4

changes.mady.by.user Adam Arafat

Saved on

compared with

New Version Current

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID917
KitDescCoin and Card

  1. Place theC-5700-TEMPDrill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Cci readerinstall kit
KitID813
KitDescCard Only - Coin Model
  1. Remove coin drop and coin box.
  2. Insert the C-5771 Metercase Bracketover the front of the metercase. Attach using the C-0303Topload Mounting Boltfrom the inside of the metercase.
  3. Optional: Apply theC-5027 Labelon or near the card reader for any accepted credit card issuers.
Cci readerinstall kit
KitID905
KitDescCard Only - Card Model

  1. Place theC-5700-TEMPDrill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Connect Power

Cci readerinstall kit
KitID595
KitDescTap Machine Power
  1. Tap the incoming AC power wires using theC-5101Spade Taps.
    1. For120vmodels:L1,N, andGroundwires
  2. Connect the three wires from the C-5210 Power Adapter Harnessto theC-5101 Spade Taps.
    1. Connect theBluewire to the L1tap.
    2. Connect the Brownwire to the Ntap.
    3. Connect theGreen/Yellowwire to the Groundtap.
  3. Connect the 3-pinconnector from the C-5210 Power Adapter Harnessto the matching connector on the C-5602R1 Power Converter.
  4. Connect the 4-pinconnector from theC-5602R1 Power Converterto the matching connector on theC-5500Power Extension Harness.
  5. Run the C-5500Power Extension Harness to the reader mounting location.

Connect Coin Sense Harness

Cci readerinstall kit
KitID693
KitDescCoin Drop - Factory Optical
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect theC-5362 Coin Sense Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

Cci readerinstall kit
KitID590
KitDescPulse - AA3 (Debit) Connection
  1. Connect theC-5364 Machine Start Harnessto theAA3(Debit)connector on the Machine Control Assembly.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF1 Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through the mounting hole.
  2. Connect the free end of theC-5364Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.
  3. (Coin and Card Installation Only)Connect the free end of theC-5362Coin Sense Harnessto port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  4. Connect the free end of the C-5500Power Extension Harnessto port 4 (Power Harness Connection Port) as shown in the image above.

Machine Configuration

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameMayTag Gen1 MLV+ Pulse
PageWithExcerpt_Machine Configuration

Cci readerinstall footer