Versions Compared

Version Old Version 2 New Version 3
Changes made by

Chris Kite

CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID841
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Cci readerinstall kit
KitID840
KitDescCard Only
  1. Secure the mounting bracket from theC-5414 F2Mounting Bracket to theC-6601Spacer Plateusing theC-5702Chase Nipple and theC-5703Nut.
  2. Feed the remaining harness ends through the open face of theCoin Vault.
  3. Spread theC-6602 Vault Mount Bracketwings outward before insertion to lock bracket into place.
  4. Feed remaining harness ends through theC-6602Vault Mount Bracket.
  5. Insert theC-6602Vault Mount Bracketinto theCoin Vault.
  6. Feed the remaining harness ends through the combinedC-5414F2 Mounting BracketandC-6601Filler Plate.
  7. Secure thecombined C-5414 F2 Mounting Bracket and C-6601 Filler Plate to theC-6602 Vault Mount Bracket with theC-0144 Screws.
  8. Install theC-0905Drop Cover over the cavity left by theCoin Dropand secure with factory hardware.

Connect Power

Cci readerinstall kit
KitID617
  1. Connect the C-5213 Power Adapter Harness to the machine AC power terminals.
    1. For120vmodels:L1,N, andGroundterminals.
    2. For240vmodels:L1,L2, andGroundterminals.
  2. Connect theBlackwire to the L1tap.
  3. Connect the Whitewire to the N/L2tap.
  4. Connect theGreen/Yellowwire to the Groundtap.
  5. Connect the opposite end of the C-5213 Power Adapter Harness to the C-5602R1Power Converter.
  6. Connect the C-5500-115Power Extension Harness to the appropriate connector on the C-5602R1Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

Cci readerinstall kit
KitID707
KitDescCoin Drop: Factory
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.
Cci readerinstall kit
KitID723
KitDescCoin Drop: Factory
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-6382 Coin Sense Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

Cci readerinstall kit
KitID634
KitDescPulse
  1. Connect the C-5254 Machine Start Harness to the P2 connection on the Machine Control Assembly.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF2 Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through the mounting hole.
  2. Connect the free end of the C-5254 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of the Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  4. Connect the free end of the C-5500-115 Power Harness to port 1.
Cci readerinstall footer