Versions Compared

Old Version 2

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 3

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID841
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Cci readerinstall kit
KitID862
KitDescCard Only
  1. Remove the coin drop and coin box from the machine.
  2. Install the C-0926 Drop Coverinto the coin drop opening and secure using the (4) C-1044NM3 Keps Nuts.
  3. Install the C-6925AMounting Bracket into the coin vault. Orient so the side the threaded fasteners face outwards towards the front of the machine and are on the bottom portion of the bracket. After inserted into the coin vault, the bracket should catch the coin vault opening when facing flush with the front of the machine.
  4. Place the C-6925BMounting Bracket Coverover the coin vault opening so the outer set of holes align with the threaded holes on the C-6925A Mounting Bracket. Then use the (2) C-5751 8-32 x 2-1/2" Screwto secure both brackets together. The C-6925AMounting Bracket enables theC-6925B Mounting Bracket Coverto anchor over the front of the machine.
  5. Attach the C-5414 Standard F2 Mounting Bracketto the C-6925B Mounting Bracket Coverusing the (2) C-542010-35 x 1/4" Pan Screws.

Connect Power

Cci readerinstall kit
KitID802
KitDescTap Machine Source Power
  1. Tap power as described in the document using theC-5101 Spade Taps provided.
  2. Connect theC-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to theC-5602 Power Converter.
  3. Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

Cci readerinstall kit
KitID702
KitDescCoin Drop: Phase 5 Control
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-6251 Coin Sense Harness to the harness connected to the Coin Drop.
Cci readerinstall kit
KitID722
KitDescCoin Drop: Phase 7 Control
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-6368 Coin Sense Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

Cci readerinstall kit
KitID648
KitDescPulse - Phase 5 Controls
  1. Connect the C-5302 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.
Cci readerinstall kit
KitID653
KitDescPulse - Phase 7 Controls
  1. Connect the C-5345 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF2 Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through the mounting hole as described in the F2,F3 Reader Install Guide.
  2. Connect the free end of the C-5345 or C-5302 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of the C-6368 or C-6251 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  4. Connect the free end of the C-5500 Power Harness to port 1.
  5. Secure the FasCard reader to base as described in the FasCard Mounting Guide.
Cci readerinstall footer