Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID598
KitDescCard Only - Coin Models
  1. Remove thecoin boxandcoin drop/slidefrom the machine's meter case.
  2. Attach the C-5414 Mounting Bracket to the C-6911 Meter Case Bracket using the (2) C-5420 10-32 x 1/4" Philips Screws.
  3. Insert the assembled C-6911Meter Case Bracketinto the front opening of the machine's meter case.
  4. Secure the C-6911Meter Case Bracketinto place by attaching theC-0301Mounting Bolt to the cage nut at the top of the C-6911Meter Case Bracketfrom inside the machine's meter case.
  5. After connecting all harnesses to the reader, use the (2) C-5416 8-32 x 3/8" Security Torx Screws to secure the reader to the C-5414 Mounting Bracket.

Connect Power

Cci readerinstall kit
KitID595
KitDescTap Source Machine Power
  1. Locate the incoming120vpower connection.
    1. Thegreen ground wireshould connect to points on the chassis and front panel.
    2. Theblack and white wiresend in a white connector.
  2. AttachC-5101Spade Tapto theblack wire,white wire, andgreen ground wire.
  3. Connect the C-5210 Power Adapter Harness to the spade taps.
    1. Blue wireto black wire.
    2. Brown wireto whitewire.
    3. Green wireto green wire.
  4. Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connector on the C-5602R1 Power Converter.
  5. Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connector on theC-5500 Power Extension Harness.

Connect Machine Interface Harness

Cci readerinstall kit
KitID665
KitDescPulse - Coin
  1. Connect the 4-pin end of the C-5371 Machine Start Harnessto the J5connector on thecoin slide interface board.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF2 Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through the mounting hole.
  2. Connect the free end of theC-5371 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of the C-5500 Power Extension Harness to port 1 (Power Harness Connection Port) as shown in the image above.
Cci readerinstall footer