Versions Compared

Old Version 2

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 3

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID584
KitDescCoin and Card

  1. Place theC-6700-TEMPDrill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Cci readerinstall kit
KitID1033
KitDescCard Only - Coin Model
  1. Feed all reader harness ends through the open face of theCoin Vault.
  2. Spread theC-6602 Vault Mount Bracketwings outward.
  3. Feed the harness ends through theC-6602Vault Mount Bracket.
  4. Insert theC-6602Vault Mount Bracketinto theCoin Vaultand ensure the inner tabs lock into place so it's secured in place.
  5. Feed the remaining harness ends through both theC-6601Filler PlateandC-5414F2 Mounting Bracket.
  6. Secure both the C-5414 F2 Mounting Bracket and C-6601 Filler Plate to theC-6602 Vault Mount Bracket with theC-0144 Screws.

Connect Power

Cci readerinstall kit
KitID794
KitDescTap Source Machine Power
  1. Tap the machine AC power wires using theC-5101Spade Taps.
    1. For120vmodels:L1,N, andGroundwires
    2. For240vmodels:L1,L2, andGroundwires
  2. Connect the three wires from the C-5210 Power Adapter Harnessto theC-5101 Spade Taps.
    1. Connect theBluewire to the L1tap.
    2. Connect the Brownwire to the N/L2tap.
    3. Connect theGreen/Yellowwire to the Groundtap.
  3. Connect the 3-pinconnector from the C-5210 Power Adapter Harnessto the matching connector on the C-5602R1 Power Converter.
  4. Connect the 4-pinconnector from theC-5602R1 Power Converterto the matching connector on theC-5500-84Power Extension Harness.
  5. Run the C-5500-84Power Extension Harness to the reader mounting location.

Connect Coin Sense Harness

Cci readerinstall kit
KitID719
KitDescCoin Drop - Factory Optical

  1. Disconnect coin drop from factory machine harness.
  2. Connect C-6360 Coin Sense Harness to the coin drop.
    1. Connect red to red.
    2. Connect green to brown.
    3. Connect blue to blue.

Connect Machine Interface Harness

Cci readerinstall kit
KitID636
KitDescPulse - Coin Connection

  1. Connect the C-5256 Machine Start Harness to the harness originally connected to the coin drop.
    1. Connect to the black and brown wires.
    2. To prevent any potential electrical issues, apply electrical tape over the blue wire connector.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF2 Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through the mounting hole.
  2. Connect the free end of theC-5256 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. (Coin and Card Installation Only) Connect the free end of the C-6360 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  4. Connect the free end of the C-5500-84 Power Extension Harness to port 1 (Power Harness Connection Port) as shown in the image above.
Cci readerinstall footer