| Cci readerinstall header |
|---|
Install Mounting Hardware
| Cci readerinstall kit | ||
|---|---|---|
| ||
|
Connect Power
Power is supplied through the same Machine Interface Harnessdescribed in step 4.
Connect Coin Sense Harness
Not applicable in this setup. FasCard reader does not collect payment from any other devices, and will only send funds to the machine's control.
Connect Machine Interface Harness
| Cci readerinstall kit | ||||
|---|---|---|---|---|
| ||||
|
Connect and Mount Reader
| Multiexcerpt include | ||||||
|---|---|---|---|---|---|---|
|
| Item No. | Component | Notes |
| 1 | Power Connection Port | Utilizes the same power harnesses as the first generation FasCard reader. |
| 2 | Pulse Connection Port | Connection point for pulse machine start harnesses. |
| 3 | Coin 1 Connection Port | This is the connection point for the harness input associated with Coin 1. |
| 4 | Coin 2 Connection Port | This is the connection point for the harness input associated with Coin 2. |
| 5 | Serial Connection Port | This is the connection point for serial machine start harnesses. |
- Feed remaining harness ends through the mounting hole as described in theFasCard Mounting Guide.
- Connect the black, 10-pin connection of theC-6124-MDBMachine Start Harnessto port 5 (Serial Connection Port) as shown in the image above.
- Connect the clear, 3-pin connection of theC-6124-MDBPower Harness to port 1.
- Secure the FasCard reader to base as described in the Touchscreen Reader Mounting Guide (F2 & F3).
Machine Configuration
TODO
| Cci readerinstall footer |
|---|