Versions Compared

Old Version 2

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 3

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID855
KitDescPayment Device Bay Mounting

  1. Remove existing payment device or payment device bay cover.

  2. Install C-6972 Vend-Rite Mounting Bracket in the payment device bay. Secure in place using factory hardware.

  3. Attach C-5414 Mounting Bracket to the C-6972 Vend-Rite Mounting Bracket using the (2)C-542010-32 x 1/4 Pan Screws.

Cci readerinstall kit
KitID980
KitDescSurface Mounting

  1. Place theC-6700-TEMPDrill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Connect Machine Interface Harness

Cci readerinstall kit
KitID839
KitDescMDB Harness
  1. Connect theC-6124-MDB Machine Start Harness to theMDB connection on the Machine Control Assembly or to the MDB harness connected to existing payment device.

Connect and Mount Reader

  1. Feed remaining harness ends through the mounting hole as described in the FasCard F2/F3 Reader Installation Guide - Front Mount.
  2. Connect the black, 10-pin connection of theC-6124-MDBMachine Start Harnessto port 5 (Serial Connection Port) as shown in the image above.
  3. Connect the clear, 3-pin connection of theC-6124-MDBPower Harness to port 1.
  4. Secure the FasCard reader to base as described in the FasCard F2/F3 Reader Installation Guide - Front Mount.
Cci readerinstall footer