Page Comparison

Remove coin box and coin slide.

Install C-5771 Metercase Bracket and secure using C-0303 Topload Mounting Bolt.

Place the C-5700-TEMP Drill Template on the desired mounting location.

Verify included harnesses will reach desired location without encountering interference from internal machine components.

Refer to FasCard Mounting Guide for further instructions.

Remove coin box and coin slide.

Install C-5771 Metercase Bracket into the front opening of the metercase and secure using C-0303 Topload Mounting Bolt from the inside.

After running the Cat5e cables and start harness through the front opening of the metercase bracket and connecting them to the LaundryCard reader, use the (2) C-0141 8-32 x 1-1/2" Socket Screws to secure the reader.

Apply the C-0015 Label to the front of the LaundryCard reader around the card slot.

Disconnect the Coin Drop from the Machine Control Assembly.

Connect the C-5362 Coin Sense Harness to the harness connected to the Coin Drop.