Page Comparison

Remove existing coin box and coin drop.

Insert C-0911 Metercase Bracket into the metercase and secure using the C-0301 Topload Mounting Bolt.

Attach reader to C-0911 Metercase Bracket using C-0141 Screws once all harnesses are connected.

Cover mounting screw holes using C-0015 Cover Label.

Place the C-6700-TEMP Drill Template on the desired mounting location.

Verify included harnesses will reach desired location without encountering interference from internal machine components.

Refer to FasCard Mounting Guide for further instructions.

Remove existing coin box and coin drop.

Run reader harnesses through the metercase and out the opening where the coin mechanism was mounted.

Attach the C-5414 Reader Bracket to the C-6911 Metercase Bracket using (2)C-5420 10-32 x 1/4 Pan Screws.

Run reader harnesses through the circular opening in the C-6911 Metercase Bracket.

Insert C-6911 Metercase Bracket into the metercase and secure using the C-0303 Topload Mounting Bolt.

Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

Connect the C-5210 Power Adapter Harness to the installed spade taps.

Connect the C-5210 Power Adapter Harness to the C-5602 Power Converter.

Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602 Power Converter.

Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect the C-5364 Machine Start Harness to the Debit/AA3 connector on the Machine Control Assembly.

1. If needed, use the C-126-MLV-EXT15 Extension Harness to extended the reach of the harness.