Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 5

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID813
KitDescCard Only - Coin Model

  1. Remove coin drop and coin box.

  2. Insert the C-5771 Metercase Bracket over the front of the metercase. Attach using the C-0303 Topload Mounting Bolt from the inside of the metercase.

  3. Optional: Apply the C-5027 Label on or near the card reader for any accepted credit card issuers.

Cci readerinstall kit
KitID614

  1. Remove existing coin box and coin drop.

  2. Insert C-0911 Metercase Bracket into the metercase and secure using the C-0301 Topload Mounting Bolt.

  3. Attach reader to C-0911 Metercase Bracket using C-0141 Screws once all harnesses are connected.

  4. Cover mounting screw holes using C-0015 Cover Label.

...

Cci readerinstall kit
KitID595

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document the incoming AC power wires using the C-5101 Spade Tapsprovided..

    1. For 120v models: L1, N, and Ground wires

  2. Connect the three wires from the C-5210 Power Adapter Harness to the installed spade tapsC-5101 Spade Taps.

    1. Connect the

    C-5210 Power Adapter Harness to the C-5602 Power ConverterConnect the opposite end of

    1. Blue wire to the L1 tap.

    2. Connect the

    C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    1. Brown wire to the N tap.

    2. Connect the Green/Yellow wire to the Ground tap.

  3. Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connector on the C-5602 5602R1 Power Converter.

  4. Connect the 4-pin connector from the C-5500 5602R1 Power Extension HarnessConverter to the appropriate matching connector on the C-5602 5500 Power Converter. The remaining cable end connects to the FasCard reader.

...

  1. Extension Harness.

  2. Run the C-5500 Power Extension Harness to the reader mounting location.

Connect Coin Sense Harness

Cci readerinstall kit
KitID693
KitDescCoin Drop - Factory Optical

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-5362 Coin Sense Harness to the harness connected to the Coin Drop.

Cci readerinstall kit
KitID721
KitDescCoin Drop: Factory

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6362 Coin Sense Harness to the harness connected to the Coin Drop.

...