Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version 4

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    Cci readerinstall kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID869
    KitDescCard Only

    1. Remove existing coin box and coin drop.

    2. Attach the C-5414 Standard Mounting Bracket to the C-6920R1 Mounting Bracket using the C-5420 Screws.

    3. Install the C-6920R1 Mounting Bracket into the coin vault opening. Secure in place using the C-1059 Kep Nuts.

    Connect Power

    Cci readerinstall kit
    KitID794

    1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

    2. Connect the C-5210 Power Adapter Harness to the installed spade taps.

    3. Connect the C-5210 Power Adapter Harness to the C-5602 Power Converter.

    4. Connect the C-5500-84 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    5. Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602 Power Converter.

    6. Connect the C-5500-84 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    Connect Coin Sense Harness

    Cci readerinstall kit
    KitID716
    KitDescCoin Drop: Edge Connector

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Cci readerinstall kit
    KitID725
    KitDescCoin Drop: Set-O-Matic Standard Connection

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6389 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID724
    KitDescCoin Drop: Set-O-Matic Terminal Connection

    Connect

    ...

    1. Machine's Orange wire to Orange and Red wires

    2. Machine's Brown wire to Brown wire

    3. Machine's Blue wire to Blue wire

    4. Machine's Red wire to Red wire

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID655
    KitDescPulse - Edge Connector

    1. Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.

    Cci readerinstall kit
    KitID623
    KitDescPulse - Rotary Timer

    1. Connect the C-0119R1F Machine Start Harness to the harness previously connected to the coin drop.

    Cci readerinstall kit
    KitID666
    KitDescPulse - Set-O-Matic

    1. Connect the C-5388 Machine Start Harness to the harness previously connected to the coin drop.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    1. Feed remaining harness ends through the mounting hole as described in the F2/F3: FasCard Reader Mounting Guide.
    2. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
    3. Connect the free end of the Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
    4. Connect the free end of the C-5500-84 Power Harness to port 1.
    5. Secure the FasCard reader to base as described in the FasCard Mounting Guide.

    Machine Configuration

    ...

    Cci readerinstall step
    componentReader

    Cci readerinstall footer