Place the C-6700-TEMPDrill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to
for further instructions.
Connect Power
Cci readerinstall kit
KitID
809
Tap power as described in the document by connecting the C-5336 Power Adapter Harness to the power distribution panel inside the machine.
120vac: Connect the blue wire to L1 and the brown wire to N.
240vac: Connect the blue wire to L1 and the brown wire to L2.
Secure the green wire beneath the ground screw.
Connect the opposite end of the C-5336Power Adapter Harness to the C-5602R1 Power Converter.
Connect the C-5500-60 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.
Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.
Connect Power
Connect Coin Sense Harness
Cci readerinstall kit
KitID
721
KitDesc
Coin Drop: Factory
Disconnect the Coin Drop from the Machine Control Assembly.
Connect the C-6362Coin Sense Harness to the harness connected to the Coin Drop.
Connect Machine Interface Harness
Cci readerinstall kit
KitID
665
KitDesc
Pulse
Connect the C-5371Machine Start Harness to the Coin 1 (J11) connection on the Machine Control Assembly.