Versions Compared

Version Old Version 4 New Version 5
Changes made by

Chris Kite

Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID584
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to FasCard Mounting Guide for further instructions.

Cci readerinstall kit
KitID863
KitDescCard Only

Coin Ready

  1. Remove existing coin box.

  2. Bend the side tabs of the C-6602 Vault Mount Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  3. Use the C-0144 Screws, attach the C-5414 F2 Mounting Bracket to the C-6602 Vault Mount Bracket

Connect Power

Cci readerinstall kit
KitID581

  1. Connect the C-6204-40 12VDC Power Harness to the H10 connection on the machine control assembly.

    1. Secure the green wire beneath the ground screw.

  2. Connect the opposite end of the C-6204-40 Power Adapter Harness (3-pin molex) to the F2 reader.

...