Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version 4

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID841
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to FasCard Mounting Guide for further instructions.

Connect Power

Cci readerinstall kit
KitID802

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

  2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

  3. Connect the C-5500-60 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

Cci readerinstall kit
KitID711
KitDescCoin Drop: Phase 5

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6343 Coin Sense Harness to the harness connected to the Coin Drop.

Cci readerinstall kit
KitID722
KitDescCoin Drop: Phase 7

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6368 Coin Sense Harness to the harness connected to the Coin Drop.

Cci readerinstall kit
KitID723
KitDescCoin Drop: Imonex with EM100 Coin Multiplier

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6382 Coin Sense Harness to the 4-pin harness connected to the EM100 board

.
Cci readerinstall kit
KitID977
KitDescCoin Drop: Dual Coin Phase 5
  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect the first C-6343 Coin Sense Harness to the coin drop harness connected to theCoin 1connector on the Machine Control Assembly.Connect the second C-6343 Coin Sense Harnessto the coin drop harness connected to the Coin 2connector on the Machine Control Assembly

    1. .

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID652
    KitDescPulse - Phase 5

    1. Connect the C-5344 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

    Cci readerinstall kit
    KitID653
    KitDescPulse - Phase 7

    1. Connect the C-5345 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    Reader

    ...

    Machine Configuration

    ...

    Cci readerinstall footer