Page Comparison

...

Cci readerinstall kit

KitID	663

Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
Connect the C-5336 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Disconnect the Coin Drop from the Machine Control Assembly.

Connect the C-6348 Coin Sense Harness to the harness connected to the Coin Drop.

cci-readerinstall-kit

KitID	713
KitDesc	Coin Drop: Phase 5

step

component	Coin Sense

Cci readerinstall kit

KitID	652
KitDesc	Pulse

Connect the C-5344 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

Multiexcerpt include

Item No.	Component	Notes
1	Power Connection Port	Utilizes the same power harnesses as the first generation FasCard reader.
2	Pulse Connection Port	Connection point for pulse machine start harnesses.
3	Coin 1 Connection Port	This is the connection point for the harness input associated with Coin 1.
4	Coin 2 Connection Port	This is the connection point for the harness input associated with Coin 2.
5	Serial Connection Port	This is the connection point for serial machine start harnesses.

...

...

Connect the free end of the C-5344 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

...

Connect the free end of the C-6348 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.

...

Connect the free end of the C-5500 Power Harness to port 1.

...

Secure the FasCard reader to base as described in the FasCard Mounting Guide.

...

Versions Compared