Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version 4

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID584
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to FasCard Mounting Guide for further instructions.

Cci readerinstall kit
KitID845
KitDescCard Only - 30lb or Larger Model

  1. Remove existing coin box and coin drop.

  2. Secure C-5414 F2 Mounting Bracket to the C-6903 Mounting Bracket using the (2)C-5420 10-32 x 1/4 Pan Screws.

  3. Install the C-6903

Mounting Bracketinto theCoin Vault. Use (4) C-1042Kep Nuts to secure toCoin Vault.
Cci readerinstall kit
KitID868
KitDescCard Only - 20lb Model

  • Remove existing coin box and coin drop.

    • Secure C-5414 F2 Mounting Bracketto the C-6902 Mounting Bracket using the (2)C-542010-32 x 1/4 Pan Screws.Install theC-6902

    1. Mounting Bracket into the Coin Vault. Use (4) C-1042Kep Nuts to secure to Coin Vault.

    Connect Power

    Cci readerinstall kit
    KitID663
    KitDescTap 120/240v Power

    1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

    2. Connect the C-5336 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

      1. Secure the ground wire beneath a chassis screw.

    3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    Connect Coin Sense Harness

    Cci readerinstall kit
    KitID923
    KitDescCoin Drop - Factory Optical

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6332 Coin Sense Harness to the harness connected to the Coin Drop.

      1. Connect the Red connector to the Coin Acceptor connection, where the coin drop was previously connected, on the Machine Control Assembly.

    Cci readerinstall kit
    KitID885
    KitDescCombination Harness - Coin Sense Connections

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the white, male, 8-pin connector from the C-6330 Combination Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID608
    KitDescSerial

    1. Connect the C-0114-MLV Machine Start Harness to the middle X1 port on the serial communication board.

    2. The RJ11 connector on the end of the C-0114-MLV Machine Start Harness will fit into the middle X1 RJ45 port even though the RJ11 connectoris smaller in size.

    3. CCIDOCCOM Boardsfalse

    Cci readerinstall kit
    KitID885
    KitDescPulse - Combination Harness - Machine Interface Connections

    1. Connect the red, female, 8-pin connector of the C-6330 Combination Harness to the Coin Acceptor connector on the Machine Control Assembly.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    Cci readerinstall step
    componentReader

    Machine Configuration

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameContinental ProfitPlus
    PageWithExcerpt_Machine Configuration

    ...