Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID992
KitDescCard Only
  1. Remove existing coin box.

  2. Insert the C-5710 Rubber Grommet into the central hole of the C-6936 Vault Bracket.

  3. Run all reader harnesses through coin vault and then the hole of the C-6936 Vault Bracket.

  4. Bend the side tabs of the C-6936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  5. Run all reader harnesses through the central hole of the C-5414 Reader Bracket.

  6. Attach the C-5414 Reader Bracket to the C-6936 Vault Bracketusing the C-0144 screw.

Connect Power

...

KitID993

...

  1. Use C-5101 Spade Tap on a L1 and L2 power wire.

  2. Connect the C-5336 Power Adapter Harness. Blue wire to L1 and Brown to L2.

  3. Connect the Green/Yellow wire to the ground screw.

...

Connect the opposite end of the C-5336 Power Adapter Harness to the C-5602R1 Power Converter.

...

Connect the C-5500-115 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

...