...
| KitID | 841 |
|---|
| KitDesc | Coin and Card |
|---|
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
...
| Cci readerinstall kit |
|---|
|
Connect the C-5213 Power Adapter Harness to the machine AC power terminals. For 120v models: L1, N, and Ground terminals. For 240v models: L1, L2, and Ground terminals.
Connect the Black wire to the L1 tap. Connect the White wire to the N/L2 tap. Connect the Green/Yellow wire to the Ground tap. Connect the opposite end of the C-5213 Power Adapter Harness to the C-5602R1 Power Converter. Connect the C-5500-115 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.
|
Connect Coin Sense Harness
| Cci readerinstall kit |
|---|
| KitID | 707 |
|---|
| KitDesc | Coin Drop: Factory |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.
|
| Cci readerinstall kit |
|---|
| KitID | 723 |
|---|
| KitDesc | Coin Drop: Factory |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly. Connect the C-6382 Coin Sense Harness to the harness connected to the Coin Drop.
|
Connect Machine Interface Harness
| Cci readerinstall kit |
|---|
|
Connect the C-5254 Machine Start Harness to the P2 connection on the Machine Control Assembly.
|
Connect and Mount Reader
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | CCIDOC |
|---|
| MultiExcerptName | F2 Reader |
|---|
| PageWithExcerpt | _Reader Ports |
|---|
|
...