...
Install Mounting Hardware
| Cci readerinstall kit |
|---|
Mount C-6762 Metercase Bracket into the front of the metercase, inserting the two studs through the coin slot openings.
Secure to the metercase using (2) C-1059 Kep Nuts and (2) C-1070-W Washers.
| Cci readerinstall kit |
|---|
| KitID | 584 |
|---|
| KitDesc | Coin and Card |
|---|
| Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to FasCard Mounting Guide for further instructions.
| Cci readerinstall kit |
|---|
| KitID | 861 |
|---|
| KitDesc | Card Only - Coin Model w/ High Capacity Metercase |
|---|
|
Remove existing coin box and coin drop.
Bridge the Coin Vault Switch connections using C-5365 Bypass Harness.
Attach C-5760-A Alliance Adapter Bracket to C-6762 Metercase Bracket.
Attach the C-5414 Mounting Bracket to C-6762 Metercase Bracket using the (2)C-5420 10-32 x 1/4 Pan Screws.| KitID | 916 |
|---|
| KitDesc | Card Only - Coin Model w/ Standard Metercase |
|---|
|
Remove existing coin box and coin drop. Attach C-5760-A Alliance Adapter Bracket to C-6760 Metercase Bracket. Attach the C-5414 Mounting Bracket to C-6760 Metercase Bracket using the (2)C-5420 10-32 x 1/4 Pan Screws. Mount C-6760 Metercase Bracket into the front of the metercase, inserting the two studs through the coin slot openings. Secure to the metercase using (2) C-1059 Kep Nuts and (2) C-1070-W Washers.
|
...
| Cci readerinstall kit |
|---|
| KitID | 636 |
|---|
| KitDesc | Pulse - Hybrid Coin Slide Control |
|---|
|
Connect the C-5256 Machine Start Harness to the manufacturer's harness previously connected to the micro switch used by the coin slide.
|
Connect and Mount Reader
...
Reader
...
Feed remaining harness ends through the mounting hole.
...
(Hybrid Coin Slide Controls Only) Connect the free end of the C-5256 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
...
(ACA/Titanium Controls Only) Connect the free end of the C-5240 Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.
...
(Coin and Card Install Only) Connect the free end of the C-6250 or C-6253 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
...
Machine Configuration
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | CCIDOC |
|---|
| MultiExcerptName | ACA Configuration |
|---|
| PageWithExcerpt | _Machine Configuration |
|---|
|
...