Versions Compared

Version Old Version 3 New Version 4
Changes made by

CCI Integration User

Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    Cci readerinstall kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID851
    KitDescCard Only - Coin Ready

    1. Remove existing coin box.

    2. Install the C-5365 Bypass Harness by removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.

    3. Bend the side tabs of the C-6936 Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

    4. Attach the C-5414 F2 Mounting Bracket to the Coin Vault Bracket using C-0144 screws.

    Cci readerinstall kit
    KitID846
    KitDescCard Only - Card Ready

    1. Install the C-6970R1 Alliance Mounting Bracket into the opening on the control panel for mounting card readers and coin drops.

    2. Attach the C-5414 F2 Mounting Bracketto the C-6970R1 Alliance Mounting Bracket and secure using the C-1060 Screws.

    3. Refer to F2 FasCard Reader Mounting Guide for further instructions.

    Connect Power

    Cci readerinstall kit
    KitID595

    1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

    2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

    3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    Connect Coin Sense Harness

    Cci readerinstall kit
    KitID700
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop

    .
    Cci readerinstall kit
    KitID928
    KitDescCoin Drop: Dual Coin
  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect the first C-6250 Coin Sense Harness to the coin drop harness connected to the Coin 1 connector on the Machine Control Assembly

    1. .

    Connect

    ...

    Machine

    ...

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID645
    KitDescPulse

    1. Connect the C-5300-NC Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.

    Cci readerinstall kit
    KitID603
    KitDescSerial

    1. Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.

    2. Connect the C-0110-CP Jumper Plug to the H6 connection on the Machine Control Assembly.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    1. Dual coin setups, connect the free end of the C-6250 Coin Sense Harness connected to the Coin 2 harness to port 4 (Coin 2 Sense Harness Connection Port) as shown in the image above.

    ...

    Machine Configuration

    ...

    Cci readerinstall footer