Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 5

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Install the C-6970 Alliance Mounting Bracket into the opening on the control panel for mounting card readers and coin drops.

    • Attach the C-5414 F2 Mounting Bracketto the C-6970 Alliance Mounting Bracket and secure using the C-1060 Screws.Refer to F2 FasCard Reader Mounting Guide for further instructions.
    Cci readerinstall kit
    KitID584
    KitDescCoin and Card

    1. Place the C-6700-TEMP Drill Template on the desired mounting location.

    2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

    3. Refer to F2 FasCard Reader Mounting Guide for further instructions.

    Cci readerinstall kit
    KitID865
    KitDescCard Only - Card Ready Models

    Connect Power

    Cci readerinstall kit
    KitID581

    1. Connect the C-6204-40 Power Adapter Harness (12VDC power) to the H10 connection on the Machine Control Assembly.

      1. Secure the green wire beneath the ground screw.

    ...