...
| Cci readerinstall kit |
|---|
| KitID | 616 |
|---|
| KitDesc | Coin and Card |
|---|
| Place the C-5700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to FasCard Mounting Guide for further instructions.
| Cci readerinstall kit |
|---|
|
Remove existing coin box. Bend the side tabs of the C-0936 Vault Mount Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket. Attach the C-0133 8-32 x 1-1/2" Standoffs to the C-0936 Vault Mount Bracket. Attach reader to the Bracket using C-0141 Screw.
|
| Cci readerinstall kit |
|---|
| KitID | 841 | KitDesc | Coin and Card |
|---|
| Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.
| Cci readerinstall kit |
|---|
|
Remove existing coin box and coin drop. Bend the side tabs of the C-6936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket. Attach the C-5414 Mounting Bracket to the C-6936 Vault Bracket using C-0144 Screws. Apply C-5035 Label over the coin drop opening.
|
...
Connect Machine Interface Harness
...
| KitID | 830 |
|---|
| KitDesc | Pulse - Terminal w/Block |
|---|
...
Attach the C-5313 Terminal Block to the Machine Control Assembly.
...
Harness
...
| Cci readerinstall kit |
|---|
| KitID | 655 |
|---|
| KitDesc | Pulse - Edge Connector |
|---|
|
Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.
|
...