Page Comparison

...

Place the C-6700-TEMP Drill Template on the desired mounting location.

Verify included harnesses will reach desired location without encountering interference from internal machine components.

Refer to

Touchscreen Reader Mounting Guide (F2 & F3)

for further instructions.

Cci readerinstall kit

KitID	584
KitDesc	Coin and Card

Cci readerinstall kit

KitID	965
KitDesc	Card Only - Coin Model

Remove existing coin box and coin drop.
Attach the C-5414 F2 Mounting Bracket to the C-6923 Metercase Bracket using (2) C-5420 10-32 x 1/4 Pan Screws.
Run any card reader harnesses through the coin slot openings and the circular hole in the C-6923Metercase Bracket.
Install the C-6923 Metercase Bracket into the front of the metercase and secure using the C-0923-ROD Metercase Mounting Rod from inside the metercase.

Cci readerinstall kit

KitID	906
KitDesc	Card Only - Card/OPL Model

Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.

Cci readerinstall kit

KitID	595
KitDesc	Tap 120/240v Power

Use the C-5101 Spade Taps on the incoming power.
1. Tap the L1 wire.
2. Tap the N/L2 wire.
3. Tap the Ground wire.
Take the C-5210 Power Adapter Harness and connect the red tab connectors to the following wires:
1. Connect the blue wire to the L1 wire.
2. Connect the brown wire to the N/L2 wire.
3. Connect the green/yellow wire to the Ground wire.
Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connection on the C-5602R1 Power Converter.
Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connection on the C-5500 Power Extension Harness.

...

Versions Compared