Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101Spade Taps provided.
Connect the C-5210Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602Power Converter.
Connect the C-5500-84Power Extension Harness to the appropriate connector on the C-5602Power Converter. The remaining cable end connects to the FasCard reader.
Cci readerinstall kit
KitID
807
Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5101Power Adapter Harness to the power distribution panel inside the machine.
120vac: Connect the brown and blue wires to connector #2 closest to outside of machine and #4 on terminal side closest to circuit board.
240vac:
Connect
...
Secure the green wire beneath the ground screw.
...
Connect the opposite end of the C-5101Power Adapter Harness to the C-5602Power Converter.
...
Connect the C-5500-84Power Extension Harness to the appropriate connector on the C-5602Power Converter. The remaining cable end connects to the FasCard reader.
Connect Coin Sense Harness
Cci readerinstall kit
KitID
689
KitDesc
Coin Drop: Factory
Disconnect the Coin Drop from the Machine Control Assembly.
Connect the C-5357Coin Sense Harness to the harness connected to the Coin Drop.
...
Cci readerinstall kit
KitID
655
KitDesc
Pulse - Edge Connector
Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.