Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Remove existing payment device or payment device bay cover.

  • Install C-6972 Vend-Rite Mounting Bracket in the payment device bay. Secure in place using factory hardware.
  • Attach C-5414 Mounting Bracket to the C-6972 Vend-Rite Mounting Bracket using the (2)C-542010-32 x 1/4 Pan Screws.
    Cci readerinstall kit
    KitID855
    KitDescPayment Device Bay Mounting
    Cci readerinstall kit
    KitID980
    KitDescSurface Mounting
    1. Place the C-6700-TEMP Drill Template on the desired mounting location.

    2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

    3. Refer to FasCard F2/F3 Reader Installation Guide - Front Mount for further instructions.

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID839
    KitDescMDB Harness
    1. Connect the C-6124-MDB Machine Start Harness to the MDB connection on the Machine Control Assembly or to the MDB harness connected to existing payment device.

    Connect and Mount Reader

    1. Feed remaining harness ends through the mounting hole as described in the FasCard F2/F3 Reader Installation Guide - Front Mount.

    2. Connect the black, 10-pin connection of the C-6124-MDB Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.

    3. Connect the clear, 3-pin connection of the C-6124-MDB Power Harness to port 1.

    4. Secure the FasCard reader to base as described in the FasCard F2/F3 Reader Installation Guide - Front Mount.

    Cci readerinstall footer