Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version 4

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    Cci readerinstall kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID869
    KitDescCard Only

    1. Remove existing coin box and coin drop.

    2. Attach the C-5414 F2 Mounting Bracket to the C-6920R1 Vault Mount Bracket using the C-5420 Screws.

    3. Install C-6920R1 Vault Mount Bracket into the coin vault. Secure in place with C-1059 Kep Nuts.

    Connect Power

    Cci readerinstall kit
    KitID0
    KitDescChange Me

    1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

    2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

    3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    Connect Coin Sense Harness

    Cci readerinstall kit
    KitID655
    KitDescCoin Drop: Factory - Edge Connector

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-5353R1 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID724
    KitDescCoin Drop: Factory - Set-O-Matic Terminal Connection
    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-6384 Coin Sense Harness to the harness connected to the Coin Drop, matching color to color.
    Cci readerinstall kit
    KitID725
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6389 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID890
    KitDescCoin Drop: Factory - Keltner SR1-WIR 110-220v

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6380 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID655
    KitDescPulse - Edge Connector

    1. Connect the C-5353R1 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

    Cci readerinstall kit
    KitID666
    KitDescPulse - Set-O-Matic Standard Connection

    1. Connect the C-5388 Machine Start Harness to the connection previously used by the coin drop.

    Cci readerinstall kit
    KitID623
    KitDescPulse - Rotary Timer

    1. Connect the C-0119R1F Machine Start Harness to the X21 connection on the Machine Control Assembly.

    Cci readerinstall kit
    KitID890
    KitDescPulse - Keltner SR1-WIR 110-220v

    1. Connect the C-6380 Machine Start Harness to the X21 connection on the Machine Control Assembly.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    1. Feed remaining harness ends through the mounting hole as described in the F2/F3: FasCard Reader Mounting Guide.
    2. Connect the free end of the Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
    3. Connect the free end of the Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
    4. Connect the free end of the C-5500 Power Harness to port 1.
    5. Secure the FasCard reader to base as described in the FasCard Mounting Guide.

    Machine Configuration

    ...

    Cci readerinstall step
    componentReader

    Cci readerinstall footer