Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 5

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    Cci readerinstall kit
    KitID906
    KitDescCard Only - Coin Ready

    1. Remove existing coin box.

    2. Install the C-5365 Bypass Harness by removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.

    3. Bend the side tabs of the C-0941 Vault Cover outward and install into the coin vault. The tabs should snap into place securing the bracket.

    4. Place the C-6700-TEMP Drill Template on the desired mounting location.

    5. Verify included harnesses will reach desired location without encountering interference from internal machine components.

    6. Refer to FasCard Mounting Guide for further instructions.

    Cci readerinstall kit
    KitID912
    KitDescCard Only - Card Ready

    Connect Power

    Cci readerinstall kit
    KitID581

    1. Connect the C-6204-40 12VDC Power Harness to the H10 connection on the machine control assembly.

      1. Secure the green wire beneath the ground screw.

    2. Connect the opposite end of the C-6204-40 Power Adapter Harness (3-pin molex) to the F2 reader.

    ...