Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version 4

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID584
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to FasCard Mounting Guide for further instructions.

  • Remove existing coin box and coin drop.

    • Attach the C-5414 Standard Mounting Bracket to theC-6922 Mounting Bracket using the C-5420 Screws.

  • Install the C-6922 Mounting Bracket into the coin vault opening. Secure in place using the C-1059 Kep Nuts.

    • Cci readerinstall kit
    KitID932
    KitDescCard Only - 30lb and Smaller Models
    Cci readerinstall kit
    KitID869
    KitDescCard Only - 40lb and Larger Models

    1. Remove existing coin box and coin drop.

    2. Attach the C-5414 Standard Mounting Bracket to the C-6920R1 Mounting Bracket using the C-5420 Screws.

    3. Install the C-6920R1 Mounting Bracket into the coin vault opening. Secure in place using the C-1059 Kep Nuts.

    Connect Power

    Cci readerinstall kit
    KitID595

    1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

    2. Connect the C-5210 Power Adapter Harness to the installed spade taps.

    3. Connect the C-5210 Power Adapter Harness to the C-5602 Power Converter.

    4. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    5. Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602 Power Converter.

    6. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    Connect Coin Sense Harness

    Cci readerinstall kit
    KitID716
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID655
    KitDescPulse

    1. Connect the C-5353R1 Machine Start Harness to the Coin 1 connection on the Machine Control Assembly.

    Cci readerinstall kit
    KitID814
    KitDescSerial

    1. Connect the C-5359 Machine Start Harness to the Input connection on the Machine Control Assembly.

    2. Connect the C-0126-MLV Machine Start Harness to the RS232 connection on the Machine Control Assembly.

    Connect and Mount Reader

    ...

    Reader

    ...

    Machine Configuration

    ...

    Cci readerinstall footer