...
| Cci readerinstall kit | ||||
|---|---|---|---|---|
| ||||
|
Connect Power
...
| KitID | 473 |
|---|
...
120vac- Connect Brown and Blue wires to connector #2 closest to outside of machine and #4 on terminal side closest to circuit board.
240vac- Connect Brown and Blue wires to connectors 3 and 5 on the terminal side closest to the circuit board.
Secure the green wire beneath the ground screw.
...
Connect the opposite end of the C-5338 Power Adapter Harness to the C-5602 Power Converter.
...
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
Connect Coin Sense Harness
...
| Cci readerinstall kit | ||||
|---|---|---|---|---|
| ||||
|
Connect and Mount Reader
| Multiexcerpt include | ||||||
|---|---|---|---|---|---|---|
|
Item No. | Component | Notes |
1 | Power Connection Port | Utilizes the same power harnesses as the first generation FasCard reader. |
2 | Pulse Connection Port | Connection point for pulse machine start harnesses. |
3 | Coin 1 Connection Port | This is the connection point for the harness input associated with Coin 1. |
4 | Coin 2 Connection Port | This is the connection point for the harness input associated with Coin 2. |
5 | Serial Connection Port | This is the connection point for serial machine start harnesses. |
...
Feed remaining harness ends through the mounting hole as described in the F2/F3: FasCard Reader Mounting Guide.
...
Connect the free end of the C-5254 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
...
Connect the free end of the C-6253 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
...
Connect the free end of the C-5500 Power Harness to port 1.
...
Machine Configuration
TODO
...