...
| KitID | 959 |
|---|---|
| KitDesc | Card Only |
...
Remove existing coin drop.
...
Install C-0913 Drop Cover where the coin drop was previously mounted. Secure using (4) C-1062 4-40 Keps Nuts.
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify that included harnesses will reach the desired location without encountering interference from internal machine components.
...
Optional: Use C-5710 Rubber Grommet to protect harnesses from damage during machine operation if any secondary hole is cut internally to run harnesses to the reader mounting location.
...