Versions Compared

Old Version 6

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 7

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID584
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to FasCard Mounting Guide for further instructions.

Connect Power

...

KitID473

...

  1. 120vac: Connect the brown and blue wires to connector #2 closest to outside of machine and #4 on terminal side closest to circuit board.

  2. 240vac: Connect the brown and blue wires to connectors 3 and 5 on the terminal side closest to the circuit board.

  3. Secure the green wire beneath the ground screw.

...

Connect the opposite end of the C-5338 Power Adapter Harness to the C-5602 Power Converter.

...

Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

...

Cci readerinstall step
componentReader

Machine Configuration

...

Cci readerinstall footer