...
| KitID | 841 |
|---|---|
| KitDesc | Coin and Card |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
| KitID | 906 |
|---|---|
| KitDesc | Card Only - Coin Ready |
...
Remove existing coin box.
...
Install the C-5365 Bypass Harness by removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.
...
Bend the side tabs of the C-0941 Vault Cover outward and install into the coin vault. The tabs should snap into place securing the bracket.
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
Connect Machine Interface Harness
...
| KitID | 582 |
|---|---|
| KitDesc | Serial or Pulse |
...
Harness
...
| Cci readerinstall step | ||
|---|---|---|
| ||
...