Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version 4

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify that included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    Cci readerinstall kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID869
    KitDescCard Only

    1. Remove existing coin box and coin drop.

    2. Attach the C-5414 Standard Mounting Bracket to the C-6920R1 Mounting Bracket using the C-5420 Screws.

    3. Install the C-6920R1 Mounting Bracket into the coin vault opening. Secure in place using the C-1059 Kep Nuts

    .

    Connect Power

    Cci readerinstall kit
    KitID794
    Tap power as described in the document using theC-5101 Spade Taps provided.Connect theC-5210 Power Adapter Harnessto the installed spade taps.Connect theC-5210 Power Adapter Harness to theC-5602 Power Converter.Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter

    1. .

    The remaining cable end connects to the FasCard reader.

    Connect

    ...

    Power

    ...

    Connect Coin Sense Harness

    ...

    KitID716
    KitDescCoin Drop: Factory

    ...

    Connect

    ...

    Connect Machine Interface Harness

    ...

    Connect

    ...

    Connect and Mount Reader

    ...

    Reader

    ...

    1. Feed remaining harness ends through the mounting hole as described in the F2/F3: FasCard Reader Mounting Guide.
    2. Connect the free end of the C-5353R1 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
    3. Connect the free end of the C-6357 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
    4. Connect the free end of the C-5500-84 Power Harness to port 1.
    5. Secure the FasCard reader to base as described in the FasCard Mounting Guide.

    Machine Configuration

    ...

    Cci readerinstall footer