Versions Compared

Old Version 9

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 10

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID9060
KitDescCard Only - Rear Control Card Models

  1. Place C-5763 TWL Bracket in the intended mounting location. Using the bracket, mark the location of all four mounting holes.

  2. Drill a hole at each marked location using a 3/16" drill bit.

  3. Attach C-5414 Mounting Bracket to the front of C-5763 using two C-5420 screws.

  4. Mount the C-5763 TLW Bracket using four C-5420 Screws and fasten from the inside of the panel.

...

Cci readerinstall kit
KitID581
KitDescACA Controls - 12VDC Accessory Power

  1. Connect the C-6204-40 12VDC Power Harness to the H10 connection on the machine control assembly.

    1. Secure the green wire beneath the ground screw.

  2. Connect the opposite end of the C-6204-40 Power Adapter Harness (3-pin molex) to the F2 reader.

Cci readerinstall kit
KitID837
KitDescTitanium Controls - 24VAC Transformer

  1. Connect the 2-pin connector from the C-6207 F2, ACA Power Harness to the 24v transformer behind the front control panel.

  2. The remaining end (3-pin molex) connects directly to the rear of the F2 FasCard Reader.

Connect Coin Sense Harness

Cci readerinstall kit
KitID674
KitDescCoin Drop: ACA Control Models

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-5250 Coin Sense Harness to the harness connected to the Coin Drop.

Cci readerinstall kit
KitID677
KitDescCoin Drop: Coin Slide Models

  1. Disconnect the Coin Drop from the Machine Control Assembly.

Connect

...

Coin Sense Harness

...

Cci readerinstall kit
KitID700
KitDescCoin Drop - Factory Optical

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.

...