Versions Compared

Old Version 6

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 7

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

KitID584
KitDescCoin and Card

...

Place the C-6700-TEMP Drill Template on the desired mounting location.

...

Verify included harnesses will reach desired location without encountering interference from internal machine components.

...

KitID846
KitDescCard Only - ACA Card Ready

...

Install the C-6970 Alliance Mounting Bracket into the opening on the control panel for mounting card readers and coin drops.

...

Attach the C-5414 F2 Mounting Bracket to the C-6970R1 Alliance Mounting Bracket and secure using the C-1060 Screws.

...

Cci readerinstall kit
KitID581

  1. Connect the C-6204-40 Power Adapter Harness (12VDC power) to the H10 connection on the Machine Control Assembly.

  2. Secure the green wire beneath the ground screw.

Cci readerinstall kit
KitID794
    Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

  1. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602R1 Power Converter.

  2. Connect the C-5500-84 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

...