...
| Cci readerinstall kit |
|---|
| KitID | 851 |
|---|
| KitDesc | Card Only - Coin Ready |
|---|
|
Remove existing coin box. Install the C-5365 Bypass Harness by removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness. Bend the side tabs of the C-6936 Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket. Attach the C-5414 F2 Mounting Bracket to the Coin Vault Bracket using C-0144 screws.
|
| Cci readerinstall kit |
|---|
| KitID | 846 |
|---|
| KitDesc | Card Only - Card Ready |
|---|
|
Install the C-6970R1 Alliance Mounting Bracket into the opening on the control panel for mounting card readers and coin drops.
Attach the C-5414 F2 Mounting Bracketto the C-6970R1 Alliance Mounting Bracket and secure using the C-1060 Screws.Refer to F2 FasCard Reader Mounting Guide for further instructions.
Connect Power
...
...
Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
...
Connect Coin Sense Harness
...