Versions Compared

Version Old Version 5 New Version 6
Changes made by

Chris Kite

Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID581
KitDescACA Control - 12VDC Accessory Power

  1. Connect the C-6204-40 12VDC Power Harness to the H10 Connection on the Machine Control Assembly.

    1. Connect the green wire to a chassis ground.

  2. The remaining end (3-pin molex) connects directly to the rear of the F2 Reader.

Cci readerinstall kit
KitID837
KitDescTitanium Control - 24VAC Transformer

  1. Connect the 2-pin connector from the C-6207 F2, ACA Power Harness to the 24v transformer behind the front control panel.

  2. The remaining end (3-pin molex) connects directly to the rear of the F2 FasCard Reader.

...

KitID663
KitDescTap 120v Machine Power

...

  1. 120vac: Connect the blue wire to L1 and the brown wire to N.

  2. 240vac: Connect the blue wire to L1 and the brown wire to L2.

  3. Secure the green wire to the ground screw.

...

Connect the opposite end of the C-5336 Power Adapter Harness to the C-5602R1 Power Converter.

...

Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

...