Versions Compared

Old Version 5

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 6

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    Cci readerinstall kit
    KitID841
    KitDescCoin and Card
    Cci readerinstall kit
    KitID851
    KitDescCard Only - Coin Ready

    1. Remove Coin Box.

    2. Disconnect harness connection from the Vault Switch. Connect both ends to the C-5365 Bypass Harness.

    3. Spread the C-6936 Vault Mount Bracket wings to lock it into place once installed.

    4. Insert the C-6936 Vault Mount Bracket into the Coin Vault.

    5. Use the C-0144 screws, attach the C-5414 F2 Mounting Bracket to the C-6936 Vault Mount Bracket.

    Cci readerinstall kit
    KitID846
    KitDescCard Only - Card Ready

    1. Install the C-6970R1 Alliance Mounting Bracketinto the opening on the control panel for mounting card readers and coin drops.Attach the C-5414 F2 Mounting Bracket to the C-6970 Alliance Mounting Bracket and secure using the C-1060 Screws.

    Cci readerinstall step
    componentPower

    ...