...
Install Mounting Hardware
...
| KitID | 584 |
|---|---|
| KitDesc | Coin and Card |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
Connect Power
...
| KitID | 802 |
|---|---|
| KitDesc | Tap Source Machine Power |
...
Tap the machine AC power wires using the C-5101 Spade Taps.
For 120v models: L1, N, and Ground wires
For 240v models: L1, L2, and Ground wires
...
Connect
...
Connect the Brown wire to the N/L2 tap.
...
Connect the Green/Yellow wire to the Ground tap.
...
Power
...
Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connector on the C-5500-60 Power Extension Harness.
...
Connect Coin Sense Harness
...