Versions Compared

Old Version 5

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 6

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    Cci readerinstall kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID598
    KitDescCard Only - Coin Model

    1. Remove existing coin box and coin mechanism.

    2. Run reader harnesses through the metercase and out the opening where the coin mechanism was mounted.

    3. Attach the C-5414 Reader Bracket to the C-6911 Metercase Bracket using (2)C-5420 10-32 x 1/4 Pan Screws.

    4. Insert the reader harnesses through the hole in the C-6911 Metercase Bracket and then insert the bracket into the metercase opening.

    5. Secure the C-6911 Metercase Bracket to the metercase using the C-0301 Mounting Bolt.

    Connect Power

    ...

    ...

    KitID595
    KitDescTap Machine Power

    ...

    Use the C-5101 Spade Taps on the incoming power.

    1. Tap the L1 wire.

    2. Tap the N wire.

    3. Tap the Ground wire.

    Take the C-5210 Power Adapter Harness and connect the red tab connectors to the following wires:

    Connect

    ...

    Connect the brown wire to the N wire.

    ...

    Connect the green/yellow wire to the Ground wire.

    ...

    Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connection on the C-5602R1 Power Converter.

    ...

    Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connection on the C-5500 Power Extension Harness.

    Connect Coin Sense Harness

    ...

    KitID721
    KitDescCoin Drop: Factory

    ...

    Disconnect the Coin Drop from the Machine Control Assembly.

    ...

    Coin Sense Harness

    ...

    Connect Machine Interface Harness

    ...