Versions Compared

Old Version 4

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 5

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    Cci readerinstall kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID869
    KitDescCard Only - 40lb+ Models

    1. Remove existing coin box and coin drop.

    2. Attach the C-5414 Standard Mounting Bracket to the C-6920R1 Mounting Bracket using the (2) C-5420 10-32 x 1/4" Philips Screws.

    3. Install the C-6920R1 Mounting Bracket into the coin vault opening. Secure in place using the (2) C-1059 10-32 Keps Nuts.

    Connect Power

    ...

    KitID595
    KitDescTap Source Machine Power

    ...

    Power

    ...

    ...

    Connect

    ...

    Secure the green wire beneath the ground screw.

    ...

    Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602R1 Power Converter.

    ...

    Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

    Connect Coin Sense Harness

    ...

    KitID716
    KitDescFactory - Optical Coin Drop

    ...

    Disconnect the Coin Drop from the Machine Control Assembly.

    Connect

    ...

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID655
    KitDescPulse - Coin

    1. Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.

    ...

    KitID814
    KitDescSerial - Compass Control

    ...

    Connect the C-0126-MLV Machine Start Harness to the RS-232 port on the Machine Control Assembly.

    ...

    Connect and Mount Reader

    Cci readerinstall footer