...
Install Mounting Hardware
...
| KitID | 906 |
|---|---|
| KitDesc | Card Only |
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
Connect Power
...
| KitID | 663 |
|---|
...
120vac: Connect the blue wire to L1 and the brown wire to N.
240vac: Connect the blue wire to L1 and brown wire to L2.
Secure the green wire beneath the ground screw.
Connect
...
Power
...
Connect
...
Connect Machine Interface Harness
...
...
Connect
...
Connect and Mount Reader
...
Reader
...
- Feed remaining harness ends through the mounting hole as described in the Touchscreen Reader Mounting Guide (F2 & F3).
- Connect the free end of the C-5364 Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.
- Connect the free end of the C-5500 Power Harness to port 1.
- Secure the FasCard reader to base as described in the Touchscreen Reader Mounting Guide (F2 & F3).
Machine Configuration
...
| Cci readerinstall footer |
|---|