Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version 4

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Place theC-6700-TEMPDrill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to for further instructions.
    Cci readerinstall kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID598
    KitDescCard Only - Coin Model

    1. Remove existing coin box and coin mechanism.

    2. Run reader harnesses through the metercase and out the opening where the coin mechanism was mounted.

    3. Attach the C-5414 Reader Bracket to the C-6911 Metercase Bracket using (2)C-5420 10-32 x 1/4 Pan Screws.

    4. Insert the reader harnesses through the hole in the C-6911 Metercase Bracket and then insert the bracket into the metercase opening.

    5. Secure the C-6911 Metercase Bracket to the metercase using the C-0301 Mounting Bolt.

    Connect Power

    ...

    KitID595
    KitDescTap Machine Power

    ...

    Power

    ...

    Connect

    ...

    Connect Coin Sense Harness

    ...

    KitID721
    KitDescCoin Drop - Factory Optical

    ...

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID665
    KitDescPulse - Coin Connection

    1. Connect the C-5371 Machine Start Harness to the P10 (Coin 1) connector on the Machine Control Assembly.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptcom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@7627108f
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    1. Feed remaining harness ends through the mounting hole.

    2. Connect the free end of the C-5371 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

    3. (Coin and Card Installations Only) Connect the free end of the C-6362 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.

    4. Connect the free end of the C-5500 Power Extension Harness to port 1 (Power Harness Connection Port) as shown in the image above.

    Cci readerinstall footer