Page Comparison

...

Cci readerinstall kit

KitID	598
KitDesc	Coin Model - Metercase Mount

Remove the coin box and coin slide from the machine's meter case.
Attach the C-5414 Reader Bracket to the front of the C-6911 Meter Case Bracket using (2)C-5420 10-32 x 1/4 Pan Screws.
Insert the assembled C-6911 Meter Case Bracket into the front opening of the machine's meter case.
Secure the C-6911 Meter Case Bracket into place by attaching the C-0301 Mounting Bolt to the cage nut at the top of the C-6911 Meter Case Bracket from inside the meter case.

Cci readerinstall kit

KitID	595
KitDesc	Power Converter with three taps

Locate the incoming 120v power connection.
1. The green ground wire should connect to points on the chassis and front panel.
2. The black and white wires end in a white connector.
Attach C-5101 Spade Tap to the black wire, white wire, and green ground wire.
Connect the C-5210 Power Adapter Harness to the spade taps.
1. Blue wire to black wire.
2. Brown wire to white wire.
3. Green wire to green wire.
Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connector on the C-5602R1 Power Converter.
Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connector on the C-5500 Power Extension Harness.

Cci readerinstall kit

KitID	665

Connect the 4-pin end of the C-5371 Machine Start Harness to the J5 connector on the coin slide interface board.

Feed remaining harness ends through the mounting hole.
Connect the free end of the C-5371 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
Connect the free end of the C-5500 Power Extension Harness to port 1 (Power Harness Connection Port) as shown in the image above.

Cci readerinstall footer

Versions Compared