...
Install Mounting Hardware
| Cci readerinstall kit |
|---|
| KitID | 598 |
|---|
| KitDesc | Card Only - Coin Models |
|---|
|
Remove the coin box and coin drop/slide from the machine's meter case. Attach the C-5414 Mounting Bracket to the C-6911 Meter Case Bracket using the (2) C-5420 10-32 x 1/4" Philips Screws. Insert the assembled C-6911 Meter Case Bracket into the front opening of the machine's meter case. Secure the C-6911 Meter Case Bracket into place by attaching the C-0301 Mounting Bolt to the cage nut at the top of the C-6911 Meter Case Bracket from inside the machine's meter case. After connecting all harnesses to the reader, use the (2) C-5416 8-32 x 3/8" Security Torx Screws to secure the reader to the C-5414 Mounting Bracket.
|
Connect Power
Connect Machine Interface Harness
| Cci readerinstall kit |
|---|
| KitID | 665 |
|---|
| KitDesc | Pulse - Coin |
|---|
|
Connect the 4-pin end of the C-5371 Machine Start Harness to the J5 connector on the coin slide interface board.
|
Connect and Mount Reader
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | CCIDOC |
|---|
| MultiExcerptName | F2 Reader |
|---|
| PageWithExcerpt | _Reader Ports |
|---|
|
...
Feed remaining harness ends through the mounting hole.
...
Connect the free end of the C-5371 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
...