...
Install Mounting Hardware
...
| KitID | 980 |
|---|
...
Place the C-6700-TEMP Drill Template on the desired mounting location.
...
Verify included harnesses will reach desired location without encountering interference from internal machine components.
...
Connect Power
Power is supplied through the same Machine Interface Harness described in step 4.
Connect Coin Sense Harness
Not applicable in this setup. FasCard reader does not collect payment from any other devices, and will only send funds to the machine's control.
Connect Machine Interface Harness
...
| KitID | 839 |
|---|---|
| KitDesc | Serial |
...
Connect and Mount Reader
...
Reader
...
Machine Configuration
...
| Cci readerinstall footer |
|---|