Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

KitID584
KitDescCoin and Card

...

Place the C-6700-TEMP Drill Template on the desired mounting location.

...

Verify included harnesses will reach desired location without encountering interference from internal machine components.

...

KitID906
KitDescCard Only - Card Ready

...

Place the C-6700-TEMP Drill Template on the desired mounting location.

...

Verify included harnesses will reach desired location without encountering interference from internal machine components.

...

KitID595

...

Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

...

Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

...

Connect Machine Interface Harness

...

KitID645
KitDescPulse

...

Connect and Mount Reader

Machine Configuration

...