Versions Compared

Old Version 37

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 38

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Multiexcerpt
MultiExcerptNameInstall Header

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Required Hardware

Card Reader

C-5001100truetruefalsefalsetrue

F2 Install Header

Multiexcerpt
MultiExcerptNameF2 Install Header

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Required Hardware

Card Reader

One of the following readers.

C-5401,C-5402,C-5403,C-5404,C-3001,C-3002100truetruefalsetruetrue

Reader Ports

Multiexcerpt
MultiExcerptNameReader ports

...

Multiexcerpt
MultiExcerptNameF2 Reader Ports

Item No.

Component

Notes

1

Power Connection Port

Utilizes the same power harnesses as the first generation FasCard reader.

2

Pulse Connection Port

Connection point for pulse machine start harnesses.

3

Coin 1 Connection Port

This is the connection point for the harness input associated with Coin 1.

4

Coin 2 Connection Port

This is the connection point for the harness input associated with Coin 2.

5

Serial Connection Port

This is the connection point for serial machine start harnesses.

Additional Info

Multiexcerpt
MultiExcerptNameAdditional Info

Additional Information

  • How to Program Address on a FasCard Reader

  • FasCard Admin Site - Equipment Setup

  • FasCard Admin Site - Machine Setup

  • FasCard Admin Site - Pricing & Features Schedule

  • F1 Reader Mounting Guide

  • FasCard F2/F3 Reader Installation Guide - Front Mount

  • FasCard Installation Videos

  • FasCard Kit Installations - Machine Configurations & Related Documents

Unverified

Multiexcerpt
MultiExcerptNameUnverified

These instructions and kit hardware have not been verified or tested by Card Concepts Inc. and are used at the installers own risk.

ACA Dip Switches

Multiexcerpt
MultiExcerptNameACA Dip Switches

ACA machines using a serial configuration require dip switch 3 on the Machine Control Board to be set to the 'ON' position. Leave all other dip switches as is.

ACA Card Ready

Multiexcerpt
MultiExcerptNameACA Card Ready

ACA Card Ready machines using a pulse configuration require a retrofit to a Coin-Ready state. This may require obtaining an additional Coin Sense Harness from Alliance.

Multiexcerpt
MultiExcerptNameTools

Description

Link/Source

Image

Champion CT7-1-1/8 Tungsten Carbide Tipped
1-1/8-Inch Hole Cutter-1-Inch Thick Metal
(Or Equivalent)

Amazon

Cutting Oil

Amazon

9/64" Drill Bit (Optional)
If drilling stainless steel should be rated for 
such
(Or Equivalent)

Amazon

Heavy Duty Professional 3/8" Magnesium Drill
with #2 drill tip extension.
(Or Equivalent)

Harbor Freight

Center Punch
(Or Equivalent)

Amazon

Hammer

Amazon

Fine Point Sharpie Marker
(Or Equivalent)

Amazon

Pliers
(Or Equivalent)

Amazon

Tape Measure

Amazon

C-5700-TEMP  FasCard Drill Template
*Included in C-1490 Kit 

CCI